MP Pumps 51016 FMX 150 Stainless Steel Self-Priming Centrifugal Pump

Basic Info

Warranty Info

Literature

Rebate Info

Video

Brand
MP Pump

Manufacturer
Gardner Denver

Manufacturer Part Number
51016

Special Order
No

Exportable
Yes

HTS Code
8413.91.9096

Country of Origin
United States of America

Rating
Nobody has rated this Product yet. Review This Product

Quantity in Stock
0

On Order
0.00

Your Price
$2,183.40

Qty

MP Pumps 51016 FMX 150 Stainless Steel Self-Priming Centrifugal Pump

The FMX series extends the FLOMAX self-priming centrifugal pump line to higher flow and head duty, for general industrial, agricultural, and marine transfer applications. Once primed, an internal flapper check valve holds a column of liquid in the suction line so the pump can re-prime on the next start without manual assistance.

This FMX 150 model is 316 stainless steel construction with 1-1/2 x 1-1/2 inch ports, sized for a 56C motor frame with a 6.0 inch impeller. It is rated to move over 100 GPM at up to 110 feet of head, with a standard carbon/ceramic/Viton mechanical seal.

Always match by the MP Pumps part number 51016 stamped on the unit or listed on your equipment parts diagram, since pump configurations vary by mount type, material, and port size even within the same series.

Key Features

Self-priming centrifugal design, capable of lifting liquid from several feet below the pump on a dry start
Internal flapper check valve maintains suction-line prime between duty cycles
316 stainless steel construction for corrosion resistance
PumPak versions are a factory-assembled, run-tested pump end ready to couple to a motor, engine, or hydraulic drive

Applications

General industrial and agricultural liquid transfer
Marine bilge, deck wash, and utility transfer service
Water transfer where higher flow or head is required
OEM and replacement service on FMX-equipped equipment

Specifications

Manufacturer: MP Pumps
Part Number: 51016
Series: FMX 150
Part Type: Pump
Construction: Stainless Steel
Port Size: 1-1/2 x 1-1/2 inch
Motor Frame: 56C
Impeller Diameter: 6.0 inch
Rated Capacity: over 100 GPM
Rated Head: up to 110 feet

Frequently Asked Questions

Q: Does this come with a motor or engine?
Availability varies by listing. PumPak versions are a bare, run-tested pump end for coupling to your own driver; complete units include the motor or engine as noted in the title.
Q: What does self-priming mean for this pump?
A self-priming pump can clear air from its own suction line on startup rather than needing the line pre-filled with liquid, using an internal check valve to hold prime between runs.
Q: Can this pump run dry?
No. Running a centrifugal pump dry for more than a few seconds can damage the mechanical seal and impeller. Shut the pump off if it loses prime and will not reprime on its own.
Q: What maintenance does this pump need?
Periodically check the mechanical seal for leaks, inspect the impeller for wear, and keep the suction line free of debris that could clog or damage the impeller.

Not sure this is the right part? Send us a picture of your Pump Plate to https://www.clrmarine.com/Contact-Us and the CLR Marine team will confirm the correct pump.