MP Pumps 51648 CHEMFLO 10 Stainless Steel Centrifugal Pump

Basic Info

Warranty Info

Literature

Rebate Info

Video

Brand
MP Pump

Manufacturer
Gardner Denver

Manufacturer Part Number
51648

Special Order
No

Exportable
Yes

HTS Code
8413.91.9096

Country of Origin
United States of America

Rating
Nobody has rated this Product yet. Review This Product

Quantity in Stock
0

On Order
0.00

Your Price
$5,649.38

Qty

MP Pumps 51648 CHEMFLO 10 Stainless Steel Centrifugal Pump

The CHEMFLO line is a series of 316 stainless steel centrifugal pumps built for chemical-duty transfer, with an enclosed impeller design suited to corrosive and process fluids. The CHEMFLO 10 is the larger-capacity model in the lineup, close-coupled to a NEMA JM-frame motor for integral shaft support.

This unit is configured for a 326JM motor frame. It is rated up to 650 GPM and up to 260 feet of head, with an 8.0 inch enclosed impeller and 4 inch suction x 3 inch discharge ANSI flanged connections. The standard mechanical seal is a Type 21 carbon/ceramic/Viton design.

Always match by the MP Pumps part number 51648 stamped on the unit or listed on your equipment parts diagram, since pump configurations vary by mount type, material, and port size even within the same series.

Key Features

316 stainless steel wetted construction for chemical compatibility and corrosion resistance
Enclosed impeller design for chemical-duty service
Close-coupled 326JM motor frame for integral shaft support
PumPak versions are a factory-assembled, run-tested pump end ready to couple to your own driver

Applications

Chemical and corrosive fluid transfer
High-volume process and industrial fluid handling where stainless wetted parts are required
OEM and replacement service on CHEMFLO-equipped systems

Specifications

Manufacturer: MP Pumps
Part Number: 51648
Series: CHEMFLO 10
Part Type: Pump
Construction: Stainless Steel
Motor Frame: 326JM
Impeller Diameter: 8.0 inch
Port Size: 4 x 3 inch ANSI Flange
Rated Capacity: up to 650 GPM
Rated Head: up to 260 feet

Frequently Asked Questions

Q: Does this come with a motor or engine?
Availability varies by listing. PumPak versions are a bare, run-tested pump end for coupling to your own driver; complete units include the motor or engine as noted in the title.
Q: How do I know this is the right pump for my equipment?
Match it by the MP Pumps part number stamped on the unit or listed on your equipment parts diagram. Send us a picture of your pump plate and we will confirm fitment.
Q: What does self-priming mean for this pump?
A self-priming pump can clear air from its own suction line on startup rather than needing the line pre-filled with liquid, using an internal check valve to hold prime between runs.
Q: Can this pump run dry?
No. Running a centrifugal pump dry for more than a few seconds can damage the mechanical seal and impeller. Shut the pump off if it loses prime and will not reprime on its own.

Not sure this is the right part? Send us a picture of your Pump Plate to https://www.clrmarine.com/Contact-Us and the CLR Marine team will confirm the correct pump.